Description
The Lynx Technik Yellobrik OET 1510 Ethernet to Fiber Transceiver (Switch) is a multi-function module which (when used with another ODT 1510 in the remote location) will extend the reach of serial RS232, RS422 or RS485 as well as two GPI (general purpose I/O) up to 10km (6.2 miles) over fiber.
A single RJ45 electrical serial connection can be configured for RS232, RS422 or RS485 serial standards. A separate RJ45 connector is provided for two electrical GPI inputs and outputs. Serial communications and GPI are transmitted and extended over the same fiber link.
The ODT 1510 is completely agnostic to the serial protocol used, and supports all standard protocols and proprietary protocols at data rates from 300 to 460K Baud (auto sensing and auto adjusting).
The integrated dip switch provides precise control over the serial mode of operation with selections for the serial standard, serial termination, RX/TX crossover and RS422/485 data direction (automatic or manual). Data activity LEDs are provided for the serial port and the GPI port under the respective RJ45 connectors.
The ODT 1510 also supports mixing and matching of serial standards. For example: the transmitting module can have a RS232 input, and the receiving module can be set for RS422 output.
Ordering Information
ODT 1510 | RS232/422/485 and GPI Fiber Transceiver |
---|---|
RFR 1000-1 | yellobrik 1RU Rack Frame |
RFR 1001 | yellobrik Mounting Bracket |
LC/SC Dup | LC Connector to SC Connector Adapter Kit |
LC/ST Dup | LC Connector to ST Connector Adapter Kit |
P-TAP 1000 | P-TAP Battery Adapter Cable |
XLR 1000 | 4 Pin XLR Camera Battery Adapter Cable |
0.0 Average Rating Rated (0 Reviews)